Codan 5705 SSPA 5 watt C Band

Description

5 WATT C Band Solid State Power Amplifier serial number B3130.  NO LNA, TRF, PSU or Cables INCLUDED.
IF input
Frequency range:
narrow BW option
70 +/-
20 MHz/ 140 +/-
20 MHz selectable
wide BW option 140
+/-
40 MHz
Impedance 50/75 Ohm
selectable
Connector N-type female
Return loss 20 dB minimum @ 50 Ohm
Gain specification
Gain  71 dB nominal
Attenuator range 0 to 30 dB nominal
Attenuator step size 1 dB nominal
Gain flatness:
narrow BW option
+/-
1.0 dB maximum, 40 MHz
wide BW option
+/-
2.0 dB maximum, 80 MHz
Gain stability +/-
1.5 dB maximum,
–
40
°
C to +55
°
C
RF output
Frequency range 5.850 to 6.425 GHz
Output power (1 dB GCP) + 37.0 dBm minimum
Connector N-type female, or CPR137-G
VSWR 1.5:1 maximum
Carrier to intermodulation ratio
–
29 dBc, two carrier, each at 6 dB OPBO from 1 dB GCP
Spurious output
–
60 dBc maximum at 1 dB GCP
Harmonics
–
40 dBc maximum at 6 dB OPBO from 1 dB GCP
Phase noise (SSB)
100 Hz
–
60 dBc/Hz maximum,
–
75 dBc/Hz typical
1 kHz
–
70 dBc/Hz maximum,
–
80 dBc/Hz typical
10 kHz
–
80 dBc/Hz maximum,
–
85 dBc/Hz typical
100 kHz
–
90 dBc/Hz maximum,
–
95 dBc/Hz typical
Synthesiser step size
1 MHz
Frequency stability
–
40
°
C to + 55
°
C +/-
1 x 10
RF input
3.625 to 4.200 GHz
Impedance 50 Ohm
Connector N-type female
VSWR 1.4:1 maximum
Noise figure 18 dB typical
DC output (switch selectable) +15 V @ 75 to 250 mA
IF output
Frequency range:
narrow BW option
70 +/-
20 MHz
/140 +/-
20 MH
z selectable
wide BW option 140 +/- 40MHz
Impedance 50/75 Ohm
selectable
3
rd
order intercept +15 dBm minimum
Connector N-type female
Return loss 20 dB minimum @ 50 Ohm
Gain specification
Gain 45 dB nominal
Attenuator range 0 to 30 dB nominal
Attenuator step size 1 dB nominal
Gain flatness:
narrow BW option
+/-
1.0 dB maximum, 40 MHz
wide BW option
+/-
2.0 dB maximum, 80 MHz
Gain stability +/-
2.0 dB maximum,
–
40
°
C to +55
°
C
Image rejection
50 dB minimum
Spurious output
–
65 dBm maximum
Phase noise (SSB)
100 Hz
–
60 dBc/Hz maximum,
–
75 dBc/Hz typical
1 kHz
–
70 dBc/Hz maximum,
–
80 dBc/Hz typical
10 kHz
–
80 dBc/Hz maximum,
–
85 dBc/Hz typical
100 kHz
–
90 dBc/Hz maximum,
–
95 dBc/Hz typical
Synthesiser step size
1 MHz
Frequency stability  –
40
°
C to +55
°
C +/-
1 x 10
–
8
Input voltage
37 to 72 V DC (floating input) standard, or
115/230 VAC,
–
15%/+20% with optional PSU 5582
Power consumption
:  DC 95 W / AC 150W maximum SSPA On
Remote monitor and control facilities
Serial interface standards RS232 RS422 (RS485)
Protocol standards ASCII Packet (RS485); various standards available
Packet protocol address range 0 to 127